Your shopping cart is empty!
Categories
- 5W Resistor (6)
- Arduino Development (66)
- Audio (8)
- Batteries (17)
- Cable & Wire (36)
- Capacitors (41)
- Charger (7)
- CNC Machine (4)
- Connector (26)
- Connector (3)
- Connector & Sockets (3)
- Crystals / Oscillators (9)
- DCA Professional Power Tools (0)
- Development Tools/ Programmers (10)
- Digital Oscilloscope (0)
- Display (64)
- Domino (5)
- Driller (16)
- ECOSPARKS PRODUCTS (0)
- Electrical Products (1)
- Ferrit (1)
- GPS Module (5)
- GSM Module (8)
- Headers (15)
- Heat shrinkable tubing (7)
- IC-Driver (17)
- IC-Microcontroller (31)
- IC-OpAm (13)
- IC-Timer (5)
- Inductors SMD (0)
- Inductors/Coils/Chokes (16)
- Integrated Circuits ( ICs ) (1)
- Max Family (7)
- Micro SD (7)
- Module Bluetooth/ Bluetooth (5)
- Module Relays (6)
- MosFet & Fet (15)
- Motor Pump (3)
- Optical Sensor (11)
- Optocouplers (3)
- Other Products (1)
- Over Voltage / Current (11)
- PCB (16)
- Potentiometers / Variable Resist (16)
- Power Supply (15)
- Projects Box (1)
- Raspberry Pi (29)
- Regulators (20)
- Relays (11)
- RePair Battery LapTop (2)
- Resistor-Network (3)
- Resistors (52)
- RF IC, Module (13)
- ROBOTIC (55)
- Semiconductors (0)
- Sensors / Transducer (81)
- Service and Repare (0)
- Smart Home (2)
- Socket-IC (10)
- Solar Panel (4)
- Solder (8)
- Soldering Tool (28)
- Specialized Function IC (10)
- surface mount (SMD) (35)
- Switches, Key Pad (25)
- Terminal block (11)
- Test & Measurement (21)
- Testboard (6)
- Tools & Supplies (56)
- Transistor (32)
- Triac (3)
- USB Connector (9)
- USB to Serial (12)
- WiFi Module (14)
- Wire Termial (15)
- Diodes (20)
- IC-Logic Family (29)
CO2 Sensor MG811 Carbon Dioxide Gas Sensor
Product Code: sonser
Availability: In Stock
Availability: In Stock
Price: USD 30.00
Qty:
- OR -
Add to Wish List
Add to Compare
Add to Compare
MG811 CO2 Carbon Dioxide Gas Sensor Module Detector with Analog Signal Output
Desription:
Carbon dioxide sensor module (with analog signal output, TTL level signals, temperature compensated output)
One size: 32mm X22mm X30mm L * W * H
Second, the main chip: LM393, carbon dioxide gas sensing probe
Third, the working voltage: DC 6V
Four characteristics:
1, having a signal output instruction;
2, dual signal output (analog output, and TTL level output);
3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller)
4, analog output (0 ~ 2V/0-4V) voltage output selectable default hair 0-2V;
5, carbon dioxide has a high sensitivity and good selectivity;
6, with a long life and reliable stability;
7, rapid response and recovery characteristics;
8, the probe can plug design for easy testing.
V. Application:
CO detection device for the family, the environment. Suitable for detecting the concentration of carbon dioxide, carbon dioxide gas sensors tested concentration range: 0 to 10000ppm
One size: 32mm X22mm X30mm L * W * H
Second, the main chip: LM393, carbon dioxide gas sensing probe
Third, the working voltage: DC 6V
Four characteristics:
1, having a signal output instruction;
2, dual signal output (analog output, and TTL level output);
3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller)
4, analog output (0 ~ 2V/0-4V) voltage output selectable default hair 0-2V;
5, carbon dioxide has a high sensitivity and good selectivity;
6, with a long life and reliable stability;
7, rapid response and recovery characteristics;
8, the probe can plug design for easy testing.
V. Application:
CO detection device for the family, the environment. Suitable for detecting the concentration of carbon dioxide, carbon dioxide gas sensors tested concentration range: 0 to 10000ppm
Specification
Signal output indication
Dual signal output (analog output and TTL) Flat output
TTL output valid signal is low
One digital output
Output: 0-2V
Operating Voltage: 5V
Interface: Gravity Analog
High quality connector
High sensitivity and good selectivity to carbon dioxide
Size: 32mm X22mm X30mm
Working Voltage: DC 6V
Main Chip: LM393, carbon dioxide gas sensing probe
Include CO2.h:
Include CO2.h:
// CO2 sensor MG811
// connect the necessary library
# include "CO2Sensor.h"
// create a sensor instance from the library,
// the first parameter is a jumper pin (A0),
// the second parameter is an inertial coefficient (0.99),
// the third parameter is the number of measurements at each reading (100)
CO2Sensor co2Sensor (A0, 0.99 , 100 );
void setup () {
// initialization of serial line communication
Serial . begin ( 9600 );
// CO2 sensor calibration
co2Sensor.calibrate ();
}
void loop () {
// read CO2 concentration from sensor to variable
int value = co2Sensor. read ();
// print serial line
serial information . print ( "CO2 concentration:" );
Serial . print (value);
Serial . println ( "ppm." );
// if the value is greater than 1000,
// print a warning for
if user (value> 1000 ) {
Serial . println ("Exceeding a safe concentration of 1000 ppm, blow up!" );
}
// pause before new during
delay loop ( 1000 );
}
- MG-811 Datasheet
- Example of MG811 sensor calibration using simple sensor library,by smart-tech-Benin in GitHub.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Latest
Powered By OpenCart
Cambodia Electronic Source © 2024
Cambodia Electronic Source © 2024