Micro Vibration Sensor

1.SW-200D is dual ball type tilt sensitive trigger switch

2.When the product tilt to trigger (A) more than 15°, B and A is open OFF-state, when product level condition tilt change, trigger (gold-plated pin end C) below the horizontal gradient greater than 15° angle, B and C is Closed-circuit ON-state.

3.In a horizontal position, be easy to trigger with a shaking, or not when silver foot down.

4.Product completely airtight, waterproof, dustproof

5.In the normal, switch life can reach 10,0000 cycles lifespan

6.Material compliant with ROSH directive, replace the mercury switch

7.Switch signals simple, circuit is simple in design, economic price

Electrical characteristics:

Voltage: <12V

Current: <20mA

Conductive time: 2ms

Closed resistance: <10 ohm

Open resistance: >10M ohm

 

Mechanical characteristics:

Temperature range: Operating: -40to 80°C, Storage: -40 to 80°C

Pull force of terminal: 500gf for 1 minute

Operating lifespan: 100,000 cycles

Humidity: 95% RH, 40°C for 96 hours

 

Bill of material:

Copper tube: brass wire silver-plated

Guide pin: brass wire, gold-plated

Ball: dual stainless steel, silver-plated/gold-plated

Heat shrink tub: PET Heat shrinkable tube, black

Sealing colloidal particle: Heat resistance nylon

Lead spring: Phosphorus copper wire

 

Welding characteristics

   Solder tin, tin content 100%

   Welding humidity: 260°C ±10°C

   Welding time: 2-2.5 seconds

Do not use strong acid alkali flux